RMP60 接觸式測頭

目前本網頁沒有您所用語言的版本。您可使用 Google 翻譯來瀏覽自動翻譯。我們並不負責提供此服務，我們也未檢查翻譯結果。
如果您希望得到更多協助，請聯絡我們。

RMP60 A touch-trigger probe with radio transmission for communicating with the machine's CNC controller, for component setting/inspection on machining centres.

RMP60 uses a unique frequency hopping spread spectrum (FHSS) radio transmission system that makes it ideal for use on large and 5-axis machines.

About RMP60

RMP60-inspect RMP60 is part of a new generation of radio transmission part probing system, ideally suited to large machining centres or where line-of-sight between probe and receiver is difficult to achieve.

RMP60 features an integrated probe module delivering exceptional robustness and generous overtravel.

RMP60 complies with FCC regulations and operates in the 2.4 GHz band. It delivers interference-free transmission through the use of FHSS (frequency hopping spread spectrum). This allows many systems to operate in the same machine shop without risk of cross-talk.

RMI The RMI integrated interface/receiver is used to communicate between the RMP60 probe and the machine control.

The probe may be activated by RF signal initiated by an M-code, spinning or shank switch.

The RMP60M is also available which enables probe inspection of part features that would be inaccessible to the standard RMP60. It allows fitment of adaptors, extensions and Renishaw’s LP2 touch probe.

RMP60 features and benefits

Compact size - 63 mm in diameter and 76 mm in length
2.4 GHz radio transmission allows single system for world-wide use
Simple setting - no channel selection required
Spherical transmission pattern with 15 m range
RMP60 and RMI systems allow multiple probes to be used, interference free, with one receiver

RMP60 specification

Specification
Sense directions	±X, ±Y, +Z
Weight	901 g (32 oz)
Transmission type	Frequency hopping spread spectrum (FHSS) radio. 2.400 - 2.4835 GHz 2400 - 2483.5 MHz
Transmission range	15 m (49.2 ft)
Switch-on method	Radio M-code, spin, shank switch
Switch-off method	Radio M-code, time-out, spin, shank switch
Uni-directional repeatability (max 2 sigma at stylus tip)	1.0 µm (0.00004 in)
Trigger force XY plane - lowest force XY plane - highest force +Z direction	0.75 N (2.64 ozf) 1.40 N (4.92 ozf) 5.30 N (18.7 ozf)
Stylus overtravel XY plane +Z direction	±18° 11 mm (0.43 in)
Standard stylus length	50 mm (1.97 in)
Maximum stylus length	150 mm (5.90 in) Note: longer styli can be used - contact Renishaw.
Battery type	Either: 2 x AA 1.5 V alkaline Or: 2 x AA 3.6 V lithium thionyl chloride
Battery life - stand-by - 5% usage - continuous life	alkaline / lithium 650 / 1300 days 100 / 200 days 140 / 280 hours
Sealing	IP X8
Shanks	Various
Compatible interface	RMI

RMP60 software options

The following software packages can be used to program probing routines for work piece set-up and inspection on CNC machining centres:

EasyProbe - entry-level package for simple work piece set-up

Inspection - basic set-up and work piece inspection cycles, with automatic update of offsets

Inspection Plus - an integrated suite of inspection cycles including vector measurement

Productivity+™ Active Editor Pro - a PC-based software package with GUI, allowing the user to select features directly from an imported CAD model, making the generation of probing cycles even easier.

RMP60 accessories and ordering information

Please contact your local Renishaw office for further information.

Part number	Description
RMP60-NS-S	RMP60 retrofit kit
RMP60-NS-KIT	RMP60 hardware only kit
A-4113-0001	RMP60 probe
A-4113-0050	RMI radio machine interface
A-4113-0303	RMI 30 m extension cable
A-2033-0830	RMI mounting bracket
A-4110-0305	RMI antenna cover
A-4113-0306	Sealtite conduit
RI-4113-0001	RMP60 upgrade kit (MP14, MP16 or MP18 users)